A dripping seam or a gutter pulling off the fascia looks like a small job, and it usually is. The price climbs when the damage reaches the wood behind the gutter or the house is two stories tall.
Most homeowners pay $240 to $480 for a gutter repair, with a national average of about $390, according to Angi. Resealing a leaking joint starts around $80. Storm damage, a long sagging run or rotted fascia can push a repair past $900, and at that point replacement is worth pricing too.
Gutter repair cost by problem
Find your problem in the first column. The price is what a contractor typically charges, including labor and materials.
| Problem | Typical price | What the job involves |
|---|---|---|
| Leaking seam, corner or end cap | $80 to $140 | Clean, dry and reseal the joint |
| Sagging section or gutter pulling away from the house | $80 to $600 | Swap loose spikes for hidden hangers, add hangers, reset the run |
| Gutter pitched the wrong way | $80 to $250 | Reset the hangers so the run drops about 1/4 inch per 10 feet |
| Clogged gutter or downspout | $160 to $400 | Clear and flush the system |
| Storm or impact damage | $240 to $550 | Straighten or replace bent sections and hangers |
| Replace one downspout | $30 to $75 each | New 10 to 15 foot aluminum or vinyl downspout with elbows and straps |
| Replace hangers | $2 to $3 per hanger, plus $50 to $150 an hour labor | Install new hangers where old ones bent or pulled out |
| Replace a section of gutter | $75 to $170 for 10 feet; $240 to $680 for 40 feet | Cut out the damaged length and splice in new gutter |
| Rotted fascia behind the gutter | $6 to $20 per linear foot | Remove the gutter, replace the board, rehang |
Problem prices from Angi; downspout, hanger, section and fascia prices from HomeGuide. National ranges checked November 2026. Local labor rates move them up or down.
Cost by gutter material
Material changes the price more than length does. Angi puts average repair costs at:
| Gutter material | Average repair cost |
|---|---|
| Vinyl | $100 to $350 |
| Aluminum | $150 to $400 |
| Steel | $230 to $600 |
| Copper | $300 to $1,000 |
Priced by the foot, Angi lists $2 to $7 per linear foot for simple repairs such as leaks and supports, and $5 to $18 per foot for complex repairs or replacement. This Old House puts repairs on standard K-style gutters at $8 to $15 per linear foot, so expect quotes anywhere in that combined band.
Cost by home height
Height adds ladder time and safety setup. HomeAdvisor reports average repair jobs of about $170 on a one-story house, $330 on a two-story house and $500 on homes with three or more stories.
What raises a gutter repair quote
- Rotted fascia. A gutter pulling away from the house often means the board behind it is soft. The gutter has to come down, the wood gets replaced, and the gutter goes back up. Angi puts full fascia replacement at about $2,500 on average, with most jobs between $1,050 and $3,300.
- Seamless gutters. A seamless run is one long piece, so a damaged middle section takes more work to splice. HomeAdvisor lists average repairs at $160 for seamed gutters and $185 for seamless.
- Painting and finishing. Angi notes that painting or other finishing adds 30% or more to the repair.
- Height and roof pitch. Second-story and steep-roof work takes longer and needs more equipment.
- Copper and steel. Both cost more to buy and take more skill to join than aluminum or vinyl.
Worked example: repair or replace?
A one-story ranch has 140 feet of aluminum gutter. Two corners drip and one 20-foot section sags.
- Resealing the corners: $80 to $140 on the Angi leak range.
- Rehanging the sagging section: $80 to $600 on the Angi sagging range.
- Total if priced separately: about $160 to $740.
- Replacing all 140 feet with seamless aluminum at the Angi rate of $9 to $13 per foot: about $1,260 to $1,820.
Even the high repair figure is well under half the replacement cost, so repair wins. Ask for one quote covering both fixes; a single visit avoids paying for setup twice.
When to replace gutters instead of repairing them
Angi suggests replacing when a repair costs more than 50% of a new system, and notes that gutters typically last about 20 years. In 2026 Angi reports a national average gutter installation cost of $1,182, with most homeowners paying $629 to $1,736. Aluminum seamless systems on larger homes run higher; Angi puts the average aluminum install at $2,400.
Replacement usually makes more sense when:
- Steel gutters have rust holes in several places. This Old House advises replacing rust-riddled steel rather than sealing it.
- Seams fail again within a season or two of being resealed.
- The gutters are 20 years old or more and need several repairs at once.
- The gutters are undersized and overflow even when clean.
See how long gutters last by material and vinyl vs aluminum vs steel gutters before you choose, and see the full gutter installation cost breakdown.
DIY gutter repair cost
Most single-story leaks and sags cost under $50 in parts. A tube of gutter sealant runs roughly $7 to $10, and hidden hangers cost a few dollars each. Angi estimates DIY saves close to $400 on average, but it does not recommend DIY on high or damaged gutters because of the fall risk.
Product links on this page are affiliate links. See our disclosure at the end.
- Geocel 2320 gutter and narrow seam sealant for seams, corners and end caps
- Hidden gutter hangers with screws for sagging runs
- Gorilla Waterproof Patch and Seal Tape for a fast temporary patch
- A ladder standoff so the ladder doesn’t rest on the gutter
Step-by-step guides: how to fix leaking gutters and how to fix a sagging gutter. Read how to stay safe on a roof first if you plan to climb.
Questions to ask a gutter repair contractor
- Is the fascia sound behind the damaged section, and what happens to the price if it isn’t?
- What hanger type and spacing will you use? About every 24 inches is the common standard, closer in snow country.
- Will you check and correct the slope on the whole run, or only the damaged section?
- Is cleaning the gutters included, or extra?
- What warranty do you give on the repair?
- Can I get the quote itemized by problem?
Get a gutter repair quote
If your gutters are above the first floor, pulling away from the house, or leaking in more than a couple of places, a local pro can price the whole job in one visit.
Rather not climb that high?
See what professional gutter cleaning costs in your area before you buy tools or rent a tall ladder. Free, no sign-up.
See local gutter cleaning prices →Gutter repair cost FAQs
How much does it cost to fix a gutter pulling away from the house?
Usually $80 to $600, the same range Angi gives for sagging and rehanging. Add fascia repair at $6 to $20 per linear foot if the wood behind the gutter is rotted.
How much does it cost to fix a leaking gutter?
Angi puts leak repairs at $80 to $140. Several leaks on the same run often cost little more than one, because most of the cost is getting the ladder up.
How much does it cost to replace a downspout?
About $30 to $75 per downspout for aluminum or vinyl, according to HomeGuide. Seamless downspouts cost more.
Is it cheaper to repair or replace gutters?
Repair is almost always cheaper for one or two problems. Replace when the repair quote passes half the cost of a new system or the gutters are near the end of their roughly 20-year life.
Related guides
- Gutter cleaning cost and calculator
- How to fix leaking gutters
- How to fix a sagging gutter or one pulling away from the house
- How to clean a downspout
- Gutter guard cost estimator
- How long do gutters last?
Updated November 2026. Sources: Angi, gutter repair cost; HomeGuide, gutter repair cost; HomeAdvisor, gutter repair cost; This Old House, gutter repair cost; Angi, gutter installation cost; Angi, aluminum gutter cost; This Old House, repairing damaged gutters.
Affiliate disclosure: RoofScour is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page, at no extra cost to you. Product picks follow the criteria in the article, not commission rates.